BATTERY POWERED WETNESS SENSOR with AUTOMATIC SHUTOFF VALVE
not yet available
MAINS POWERED WETNESS SENSOR with AUTOMATIC SHUTOFF VALVE
"The Beaver" IS no LONGER available FROM AQUATRIP!
pLEASE VISIT THE 'NEW HOME' OF THE RENAMED
'HYDRO VALVE' AT BUILDTUFF PTY LTD BY CLICKING HERE,
OR CALL (07) 3184-4000
AT601 - Battery Powered Wetness Sensor
The AT601 (The Beaver) is a Wetness Sensor connected to an automatic Water Shutoff Valve. It is designed to detect water that may leak from Hot Water Systems, Washing Machines, Dishwashers, Water Dispensers, Laundries, Basements or any floodable area, where there is the possibility of a leaking appliance or broken pipe joint flooding the premises. Internal Use only.
The Beaver is available with a selection of quality shut off valves, linked by a cable to a Wetness Sensing Control Unit.
-
Wetness Detection System for automatic shut-off of incoming water supply in event of a leak
-
Protects Water Heaters, Washing Machines, Dishwashers, Water Dispensers, Laundries, Ice Makers etc
-
Powered by 9V alkaline battery (supplied)
-
Audible alarm for low battery warning and water OFF alert
-
The system can optionally also send a signal to the BMS or Alarm System if a leak is detected, as well as shutting off the water supply. (Optional cable Part # CBL-601BMS)
-
Very simple reset of system once leak is repaired using the Reset Button
-
Choice of 15mm , 20mm or 25mm commercial quality 316 Stainless steel valves
-
Simple Manual Override Facility in the event of Control Unit or Battery failure
-
Very Simple to install (NOTE: For Indoor or Covered use only)
-
Certified to meet AS5300.476 and AS4020 Watermark approved
AT601M - Mains Powered Wetness Sensor
The mains powered Beaver functions the same as the battery powered version and is also available with a selection of stainless steel shut off valves, linked by a cable to a Wetness Sensing Control Unit.
-
Wetness Detection System for automatic shut-off of incoming water supply in event of a leak
-
Protects Water Heaters, Washing Machines, Dishwashers, Water Dispensers, Laundries, Ice Makers etc
-
Powered by a low voltage plug in power supply (no electrician required)
-
Also has a rechargeable backup battery which takes over if mains power fails
-
Rechargeable battery power level can be checked anytime by pressing the Control Button
-
Low voltage power supply plugs into standard GPO – 5m cable supplied, with optional 6 metre cable extensions available if GPO not within 5m
-
Mains power version has considerable advantage over battery powered version because over the long term it is less dependent on the user to monitor and maintain the battery condition and status.
-
Audible alarm for water OFF alert
-
The system can also optionally send a signal to the BMS or Alarm System if leak is detected, as well as shutting off the water supply. (Optional cable Part # CBL-601BMS)
-
Very simple reset of system once leak is repaired using the Reset Button
-
Choice of 15mm / 1/2" or 20mm / 3/4" Commercial quality 316 Stainless steel or 25mm / 1" PVC shut off valves
-
Simple Manual Override Facility in the event of Control Unit or Battery failure
-
Very Simple to install (NOTE: For Indoor or Covered use only)
-
Certified to meet AS5300.476 and AS4020 Watermark approved
