ABOUT US

AquaTrip is a permanently installed Leak Detection System with an integrated automatic Shutoff Valve.

It functions as a Water Trip Switch, constantly monitoring all the plumbing pipes, fittings and water using appliances on the property.

 

If it detects a leak, a tap left running or some other plumbing failure, it will shut off the water automatically, to minimise water damage, prevent excess water bills and save water.

 

You can easily turn the water back on when required.

Aquatrip Australia Pty. Ltd.       All rights reserved - © 2017

AVAILABLE IN AUSTRALIA FROM:

Purchase an

AquaTrip Online

AquaTrip

around the world

How can an

Aquatrip help

TERMS, CONDITIONS OF SALE & WARRANTY:

Click HERE.

Short Antenna with universal flylead for connection to pulse output water meters. No meter pickup is supplied - requires the appropriate meter pickup to be purchased separately and connected to the fly lead. For use with AT301 series Leak Detection systems.

ANT2-0N - Short Antenna w/flylead

SKU: ANT2-0N
AU$29.95Price
  • This antenna has a two wire fly lead supplied for connection to a variety of water meters. The connection to the water meter is not supplied and this will vary according to the type of meter you are connecting to. Note: it can only work if the meter has a pulse output and you will need to obtain the correct interface cable from the water meter supplier to connect to these two wires. Once connected, this enables the AT301 to receive the water meter signal data and display the consumption and cost on the Control Panel in almost real time with a 10 minute delay. This short antenna is used if you wish to connect the AT301 to the water meter and the radio signal between the Control Panel and Control Unit is not affected by any shielding. If the signal is poor and the AT301 Control Unit is being shielded, then you will need to use the Part # ANT2-3N which extends the antenna by 3 metres so it can be placed in a spot where it will receive the radio signal more clearly.